Aci Certification- Test: S-13 Standpipe System, City Wide
Settings
-
+
ACI is seen by many as Cisco's software-defined networking (SDN) offering for data center and cloud networks. This course is perfect for h helping someone pass their plumbing exam and prove that they can undertake the duties given to them. Are you ready for the ACI Certification? Take this S-13 Standpipe System, City Wide test and see what is in store for you come exam time.
- 1.
- A.
A.) Determine the duration the system is going to be out of service.
- B.
B.) Inspect the areas of the building affected and assess the increased risk.
- C.
C.) Notify the insurance carrierm the central station operator (if so equipped), The occupants of the affected area, and place out of service tags and discs at the appropriate locations (901.7.4)
- D.
D.) All of the above.
- 2.Detailed records of a standpipe system inspections must be kept for a period of:
- A.
A.) One year
- B.
B.) Five years
- C.
C.) Six months
- D.
D.) Three years
- 3.A sketch of the entire standpipe system must be readily available and indicate the location of all:
- A.
A.) Call boxes
- B.
B.) Sprinkler heads
- C.
C.) Control valves
- D.
D.) Exits
- 4.
- A.
A.) To shut down part of the fire protection system when making repairs.
- B.
B.) To keep the fire pump connected to the fire protection system.
- C.
C.) To pump water into the fire protection system
- D.
D.) To regulate the water pressure in the fire protection system.
- 5.Standpipe systems should be visually inspected by the Certificate of Fitness holder at least once:
- A.
A.) A week
- B.
A.) A week
- C.
C.) A year
- D.
D.) Every six months
- E.
E.) A month
- 6.
- A.
A.) At the lowest point of the system
- B.
B.) At the base of the gravity tank if one is installed
- C.
C.) The Siamese connection serves as the drain valve
- D.
D.) Next to the main supply riser on the first floor.
- 7.
- A.
A.) Should have pressure- increasing valves installed at the hose outlets.
- B.
B.) May be used in combination with a sprinkler system in the same building.
- C.
C.) Is never used in buildings more than ten stories high.
- D.
D.) Must be installed in all buildings
- 8.The Standpipe system inspection records must be:
- A.
A.) Sent to the fire department inspection division monthly.
- B.
B.) Reviewed monthly by a fire department inspector
- C.
C.) Kept on the premises and made available to Fire Department representatives
- D.
D.) Filed with the city clerkâs office
- 9.
- A.
A.) By activating the control device in its normal manner.
- B.
B.) By attaching alligator clips to the fusible element.
- C.
C.) By attaching alligator clips to the control board.
- D.
D.) By disconnection the appropriate wire from the control board.
- 10.The Fire Department Siamese connection to an automatic wet standpipe system should be fitted with:
- A.
A.) An automatic release valve.
- B.
B.) A pintle release valve
- C.
C.) A check valve
- D.
D.) A pressurized discharge nozzle.
- 11.
- A.
A.) This is a minor defect in the fire protection system and requires notification to the owner/manager and the bureau of Fire Prevention
- B.
B.) This is a minor defect in the fire protection system and requires notification to the owner/manager and the bureau of Fire Prevention and the local fire house.
- C.
C.) This is not a defect in fire protection system and does not require notification
- D.
D.) This is a major defect in the fire protection system and requires notification to the owner/manager, local fire company and the bureau of Fire Prevention.
- 12.
- A.
A.) The wheel on the check valve has been turned clockwise.
- B.
B.) The stem of the OS&Y valve is all the way out and exposed.
- C.
C.) The wheel on the check valve has been turned counterclockwise.
- D.
D.) The Stem of the OS&Y valve is all the way in and unexposed.
- 13.A signal from a water flow switch installed on a standpipe system is considered a (an):
- A.
A.) Supervisory alarm signal
- B.
B.) Tamper alarm signal
- C.
C.) Inquiry alarm signal
- D.
D.) Fire alarm signal
- 14.
- How can you tell that an OS&Y valve is open?
- A.
A.) The wheel is turned
- B.
B.) You can see the stem is fully extended.
- C.
C.) It has wire and seal.
- D.
D.) By the lock and chain around the valve.
- 15.
- A.
A.) Standpipe (wet/dry) RED
- B.
B.) Non-automatic sprinkler GREEN
- C.
C.) Combination sprinkler/standpipe system YELLOW
- D.
D.) Automatic sprinklers GREEN
- 16.Where are the tags placed after inspection?
- A.
A.) Control panel
- B.
B.) Control valves
- C.
C.) Inspection record log books
- 17.What is the color of the tags (standpipe) for a system fully out of service?
- A.
A.) Red
- B.
B.) Orange
- C.
C.) Blue
- 18.
- A.
A.) Red
- B.
B.) White
- C.
C.) Blue
- 19.What is the color of tag if a standpipe system is partially out of service?
- A.
A.) Red
- B.
B.) White
- C.
C.) Blue
- 20.In accordance to the above question (#19) what would be the color of the disc?
- A.
A.) Red
- B.
B.) White
- C.
C.) Blue
- 21.Who may place white or blue disc’s?
- A.
A.) Certificate of Fitness holder
- B.
B.) Fire Department only
- C.
C.) Fire Department, owner, MFAPC or MLP
- 22.If fully or partially out of service discs are placed. Who would you notify?
- A.
A.) FDNY
- B.
B.) Building owner
- C.
C.) Building owner and standpipe service company
- 23.
- A.
A. Fire sprinklers designs to open base on temperature
- B.
B. Is a piping in a building that serves to transfer water to hose connections located within the building for fire fighting purposes
- C.
C. A fire protection system consisting of sprinkler heads, fire pumps, gravity tanks.
- 24.
- A.
A. Fire sprinklers designs to open base on temperature
- B.
B. Is a piping in a building that serves to transfer water to hose connections located within the building for fire fighting purposes.
- C.
C. A fire protection system consisting of sprinkler heads, fire pumps, gravity tanks.
- 25.In Accordance with the above question (#24) systems not complying with this fire code shall be considered?
- A.
A.) In compliance
- B.
B.) Subject to inspection
- C.
C.) Impaired
Back to top