CCENT Quizzes & Trivia
The Cisco Certified Entry Networking Technician Exam (CCENT) is one which most people have Goosebumps just thinking about. It is designed to certify one as being able to carry out the duties of a network technician. Do you think...
Questions: 47 | Attempts: 3353
-
Sample QuestionWhat are two ways that TCP uses the sequence numbers in a segment? (Choose two.)
One of the uses of a computer is the sharing of information, and this is made possible by the use of networks. Being that you are planning to sit for CCENT, you have some basic knowledge of networking. The quiz below is designed...
Questions: 50 | Attempts: 2857
-
Sample QuestionData is being sent from a source PC to a destination server. Which three statements correctly describe the function of TCP or UDP in this situation? (Choose three.)
A transmission control protocol is a design in which a network is established and maintained to enable the exchange of data. This is one of the topics we got to cover in out introduction to CCENT/CCNA Icnd1 Chapters 2 + 3. Do...
Questions: 21 | Attempts: 1406
-
Sample QuestionWhich of the following protocols are examples of TCP/IP transport layer protocols?
This is the third in a series of tests designed to help you perfect your understanding on the chapters you cover for CCENT/CCNA Icnd 1 classes. The one below covers chapter 4 and 5. Give it a try and keep an eye out for the...
Questions: 21 | Attempts: 735
-
Sample QuestionWhich of the following best describes the main function of OSI Layer 1 protocols?
This is the fourth in a series of tests designed to help you perfect your understanding on the chapters you cover for CCENT/CCNA Icnd 1 classes. The one below covers chapter 6 and 7. Give it a try and keep an eye out for the...
Questions: 16 | Attempts: 690
-
Sample QuestionWhich of the following header fields identify which TCP/IP application gets data received by the computer?
CCENT Questions & Answers
What would the result be if the telnet 10.0.2.2 command is issued from Switch1 privileged mode? Switch1 has only the following commands added to a default Cisco 2960 configuration: enable...
The question says the switch1 is configured properly for remote access. There is not indication on the configuration applied on switch1 to assume default-gateway is not configured.
The link between Router2 and Switch2 should be trunk and the ip on S
What are two ways that TCP uses the sequence numbers in a segment?
There are two answers to this question, and these answers are B and C. First, the segments should be rearranged at the proper location, and second, the numbers will make it easier to specify the order from which the segments can be moved from the sou
Which OSI layer defines the functions of logical network-wide addressing and routing?
Right Medhat_tekka they should review the last question because it's layer 3 the correct answer
What would be a valid network address for the new subnet on RTA?
More
A is the answer to this question. The network address is the first address of the subnet. This is important because this is needed to know details about the source and the destination of the different sub-networks available. The network address is al
Are you sure you understood all you covered when it comes to the CCENT/CCNA Icnd1 chapters 14 and 15? If you are in doubt take up the quiz below and see if you might need some ample time to revise for it all. All the best and...
Questions: 23 | Attempts: 542
-
Sample QuestionWhich of the following are private IP networks?
This is the fifth in a series of tests designed to help you perfect your understanding on the chapters you cover for CCENT/CCNA Icnd 1 classes. The one below covers chapter 8 and 9. Give it a try and keep an eye out for the...
Questions: 15 | Attempts: 529
-
Sample QuestionIn what modes can you execute the command show mac-address-table?
A CCENT certification is one thing that every IT personnel know is able to help them show their competency to a prospective employer. Are you studying to take the certification exam and are not sure about your...
Questions: 48 | Attempts: 403
-
Sample QuestionData is being sent from a source PC to a destination server. Which three statements correctly describe the function of TCP or UDP in this situation? (Choose three.)
Now we continue to have a chapter-to-chapter revision for the CCENT/CCNA Icnd1 to help us retail the knowledge gathered so far. The quiz below is for chapter 16 and 17 and is designed to keep you on your feet. Take it up and...
Questions: 16 | Attempts: 390
-
Sample QuestionWhich of the following must be true for a static route to be installed in a router’s IP routing table?
Do you know that if you take a course you love the exam will not be as hard as others take it to be? The CCENT/CCNA exam below icnd2 is fun and is designed to help you with the exam at the end of the day. Give it a shot and...
Questions: 18 | Attempts: 373
-
Sample QuestionWhich of the following fully encapsulates the original Ethernet frame in a trunking header rather than inserting another header inside the original Ethernet header?
If you are studying for the CCENT/CCNA icnd1 exam then the quiz below is one you should take. It is made up of some questions designed to help you extensively revise for chapter 12 and 13 as a whole. Give it a shot and see...
Questions: 17 | Attempts: 312
-
Sample QuestionImagine that a switch connects via an Ethernet cable to a router, and the router’s hostname is Hannah. Which of the following commands could tell you information about the IOS version on Hannah without establishing a Telnet connection to Hannah?
Are you a student taking up CCENT/CCNA Icnd1? In order to improve your retention power for the chapters you have covered we have prepared a series of tests, this one covers last week, which is chapter 2 and 3. Give it a shot...
Questions: 14 | Attempts: 290
-
Sample QuestionWhich of the following standards has a limit of 18,000 feet for the length of the local loop?
It is a known fact that the more you associate yourself with a topic the more you understand it. Below is candid test on CCEENT/CCNA Icnd2 and is specifically designed to test you on chapters 4 and 5. Do you believe you can...
Questions: 14 | Attempts: 274
-
Sample QuestionA PC user turns on her computer, and as soon as the computer is up and working, she opens a web browser to browse http://www.ciscopress.com. Which protocol(s) would definitely not be used by the PC during this process?
This is the sixth in a series of tests designed to help you perfect your understanding on the chapters you cover for CCENT/CCNA Icnd 1 classes. The one below covers chapter 10 and 11 extensively. Give it a try and keep an eye...
Questions: 9 | Attempts: 271
-
Sample QuestionWhich of the following affect the calculation of EIGRP metrics when all possible default values are used?
It is not uncommon for one to have cold feet on how ready they are for an exam and this is because one can never be a hundred prevent ready. Do you believe you are ready for the certification exam? If so take up the quiz...
Questions: 49 | Attempts: 253
-
Sample QuestionWhat are two ways that TCP uses the sequence numbers in a segment? (Choose two.)
The CCENT exam is the first step towards obtaining certification. It covers some of the things we will discuss in depth once you start the CCNA exam. Have you just finished covering chapter 8 in class? Take this CCENT/CCNA...
Questions: 10 | Attempts: 244
-
Sample QuestionWhich of the following routing protocols are considered to use distance vector logic?
Chapter 9 of the CCENT/CCNA icnd2 is all about something that all computer geniuses should know before they can be cleared to work in the field. The quiz below is designed to help you know just how much of the chapter you...
Questions: 10 | Attempts: 208
-
Sample QuestionWhich of the following affects the calculation of OSPF routes when all possible default values are used?
This is the seventh in a series of tests designed to help you perfect your understanding on the chapters you cover for CCENT/CCNA Icnd 1 classes. The one below covers chapter 12 and 13. Give it a try and keep an eye out for...
Questions: 15 | Attempts: 189
-
Sample QuestionWhich of the following PPP authentication protocols authenticates a device on the other end of a link without sending any password information in clear text?
As we continue revising for the final CCENT/CCNA exam it is growing more and more important for one to be on their toes before the exam. Take the quiz below specifically designed to help you tackle any question that may arise...
Questions: 7 | Attempts: 182
-
Sample QuestionBarney is a host with IP address 10.1.1.1 in subnet 10.1.1.0/24. Which of the following are things that a standard IP ACL could be configured to do?
CCENT/CCNA ICND1 Chapters 2 + 3
Questions: 21 | Attempts: 157
-
Sample QuestionWhich of the following protocols are examples of TCP/IP transport layer protocols?
CCENT/CCNA ICND2 CHAPT. 14 + 15
Questions: 14 | Attempts: 122
-
Sample QuestionImagine two Cisco routers, R1 and R2, using a Frame Relay service. R1 connects to a switch that uses LMI type ANSI T1.617, and R2 connects to a switch that uses ITU Q.933a. What keywords could be used in the R1 and R2 configuration so that the LMIs work correctly?
This is the ninth in a series of tests designed to help you perfect your understanding on the chapters you cover for CCENT/CCNA Icnd 1 classes. The one below covers chapter 16 and 17. Give it a try and keep an eye out for the...
Questions: 18 | Attempts: 116
-
Sample QuestionWhat does CIDR stand for?
A data cable is a cable that provides communication between devices. A data cable that connects your monitor to your computer allows your computer to display a picture on the monitor. Test out what you know about cables and...
Questions: 14 | Attempts: 60
CCENT Practice Certification Exam #1
Questions: 50 | Attempts: 14
-
Sample QuestionWhat are two ways that TCP uses the sequence numbers in a segment? (Choose two.)
